Engineered Wooden Flooring
We are a leading dealer/wholesaler/distributor of Engineered Wooden Flooring in Delhi. We are also leading importer and supplier of Engineered Wooden Flooring in Delhi. We also dealer/wholesaler/distributor of Industrial Engineered Wooden Flooring in Delhi.The best engineered wood floors are built having 3-12 multiple ply layers (see picture below) that are cross layered, glued and pressed together. The inner core layers are are generally built up with either a hardwood and/or soft plywood type of material, which incorporates the tongue and groove fastening system along the edges of the boards. The top thicker hardwood veneer wear layer is then glued and pressed on the top surface of the core. Engineered hardwood flooring is available in almost any wood species.
The benefits of using engineered wood floors include more resistance to slightly lower and higher moisture levels than solid wood flooring, which adds to their appeal to use in damp basements or in regions of the country that have higher or lower than normal relative humidity levels. Also, engineered flooring (excluding the newer Click Lock flooring) can be direct glued-down over (dry) concrete slabs above or below grade or stapled down over a wood subfloor. Quality Engineered Hardwood flooring has the same resale value as 3/4 IN. solid wood flooring, if you ever decide to sell your home.
Engineered Hardwood floors range in a wide array of widths from 3-7 inches wide and in thicknesses from 3/8 - 3/4" they also come in a wide variety of domestic and exotic hardwood species and some are even available in the popular hand scraped styles. Some brands of engineered flooring have a thin .6 mm wear layer that can only be re-coated and cannot be sanded and refinished new again once they get worn, they have an average lifespan of between 20-30 years depending on traffic. Other brands or styles can have a thicker 2 - 6 mm thick wear layer that can be completely sanded and refinished new again 1- 5 times if they ever needed to be. These thicker wear layer engineered floors are usually more expensive to purchase upfront but can last 40 -100 or more years before having to be replaced. See our article on Engineered flooring wear layers for more information.
Click Loc engineered flooring is becoming a more and more relevant trend in the engineered market. Click locking engineered boards have special tongue and groove systems that simply lock together, forming a tight seam and a seamlessly smooth appearance. Click locking floating engineered floors require absolutely no glue during installation and just lay over a foam or cork underlayment. Click locking engineered floors can be installed on any grade level in the home and not only over traditional plywood or concrete subfloors, but also over old hardwood flooring, vinyl and tile as long as they are flat and well secured.
Engineered wood floors are manufactured two ways, one, where the top surface wear layer is Sliced/Sawn cut from the log like solid wood flooring is. Engineered hardwood flooring that has a Sliced/Sawn cut wear layer shows the truer natural look of the wood and finer graining. Sliced/Sawn cut engineered flooring also allows a thicker wear layer.
Engineered wood floors can also be Rotary cut, which the veneer hardwood wear layer is peeled off the log using big lathes. This peeling method can show dramatic wilder graining.